The 0,6/1kV control cable

Conductor: Electrolytic copper, class 5, based on EN 60228

Insulation: PVC.
The standard identification is the following:
1 x Black
2 x Brown + Blue
3 G Brown + Blue + Yellow/green
3 x Brown + Black +Blue
3 x +1 Brown + Black + Black + Blue (reduced cross setcion)
4 G Brown + Black + Blue + Yellow/green
4 x Brown + Black + Black + Blue
5 G Brown + Black + Black + Blue + Yellow/green
6 or more Black numbered + Yellow/green
Other identifications are possible upon request.

Outer sheath: Flexible PVC outer sheath, black colour. Other colours available upon request.

Applications: The Flextel 200 VV-K cable is suitable for fixed installations with complex layouts where flexible cables are required. It is also used for connecting motors or frequency converters. The characteristics of the outer sheath material make this cable extremely versatile as it provides a high level of protection in all types of environments.

National norm / european: EN 60332-1

International norm: IEC 60332-1

CHARACTERISTICS

Flexible conductor, class 5	Minimum service temperature: -15ºC	Maximum service temperature: 70ºC

Maximum short-circuit temperature: 160ºC (max 5 s)	Minimum bending radius: 5 x cable diameter	Meter by meter marking

Flame non-propagation	Impact resistance: AG2. Medium impact	Outdoor installation: permanent

Water resistance: AD6 waves	Chemical & oil resistance: good