Safe signal transmission.

Conductor: Electrolytic copper, class 5, based on EN 60228

Insulation: PVC.
The standard identification is the following:
2 x Blue + Brown
3 G Blue + Brown + Yellow/green
4 G Brown + Black + Grey + Yellow/green
4 x Brown + Black + Grey + Blue
5 G Brown + Black + Grey + Yellow/green + Blue
6 or more conductors Black numbered + Yellow/green.
Other identifications (JZ, OZ, J, Z) are available upon request.

Separator: Polyester tape.

Screen: Tinned copper braided screening.

Outer sheath: Flexible PVC, Black or grey colour.

Applications: Screenflex 110 is a screened control cable. It is used in all types of signal transmission connections where the voltage induced by an exterior electromagnetic field may affect the signal transmitted. Its most common applications are: control circuits, electronic equipment connections, computer systems, etc.

National norm / european: EN 60332-1 / EN 50266

International norm: IEC 60332-1 / IEC 60332-3

CHARACTERISTICS

Flexible conductor, class 5	Minimum service temperature: -15ºC	Maximum service temperature: 70ºC

Maximum short-circuit temperature: 160ºC (max 5 s)	Minimum bending radius: 5 x cable diameter	Meter by meter marking

Flame non-propagation	Fire non-propagation (only grey outer sheath)	Impact resistance: AG1. Weak impact

Outdoor installation: occasional	Water resistance: AD5 water jet	Chemical & oil resistance: good

Electric fields resistant