The halogen free control cable.

Conductor: Electrolytic copper, class 5 (flexible), based on EN 60228

Insulation: LSZH Polyolephine.
The standard identification is the following:
6 or more conductors: Black numbered + Yellow/green.

Outer sheath: LSZH polyolephine outer sheath. Green colour, non-toxic and fire retardant.

Applications: The Toxfree Z1Z1-K (AS) cable with zero halogens is a high security cable. In case of fire, it does not emit toxic or corrosive gases, thereby protecting public health and avoiding any possible damage to electronic equipment. For this reason, its use is recommended in public places such as: hospitals, schools, museums, airports, bus terminals, shops in general, tunnels, the underground, etc., as well as in calculation centres, offices, production plants, laboratories, etc.

National norm / european: EN 60332-1 / EN 50266 / EN 50267-1 / EN 50267-2 / EN 61034

International norm: IEC 60332-1 / IEC 60332-3 / IEC 60754-1 / IEC 60754-2 / IEC 61034

CHARACTERISTICS

	Flexible conductor, class 5		Minimum service temperature: -15ºC		Maximum service temperature: 70ºC
	Maximum short-circuit temperature: 160ºC (max 5 s)		Minimum bending radius: 5 x cable diameter		Meter by meter marking
	Fire non-propagation		LSZH		Low smoke emission: Light transmittance > 60%
	Low corrosive gases emission		Impact resistance: AG2. Medium impact		Outdoor installation: permanent
	Environmentally friendly		Water resistance: AD3 Aspersion		Chemical & oil resistance: acceptable

INSTALLATION CONDITIONS

	Public places		Industrial use
	Open air		Buried
	In conduit