The halogen free screened control cable

Conductor: Electrolytic copper, class 5 (flexible), based on EN 60228

Insulation: LSZH Polyolephine.
The standard identification is the following:
6 or more conductors: Black numbered + Yellow/green.

Separator: Polyester tape separator to avoid direct contact between the insulated conductors and the copper braid.

Screen: Tinned copper braided screening.

Outer sheath: LSZH polyolephine outer sheath. Green colour, non-toxic and fire retardant.

Applications: The screened and halogen free control cable Toxfree ZH Z1C4Z1-K (AS) is a high security cable. In case of fire, it does not emit toxic or corrosive gases, thereby protecting public health and avoiding any possible damage to electronic equipment. For this reason, its use is recommended for public places and for all installations where it is necessary avoid electric interference of nearby circuits.

National norm / european: EN 60332-1 / EN 50266 / EN 50267-1 / EN 50267-2 / EN 61034

International norm: IEC 60332-1 / IEC 60332-3 / IEC 60754-1 / IEC 60754-2 / IEC 61034

CHARACTERISTICS

Flexible conductor, class 5	Minimum service temperature: -15ºC	Maximum service temperature: 70ºC

Maximum short-circuit temperature: 160ºC (max 5 s)	Minimum bending radius: 5 x cable diameter	Meter by meter marking

Fire non-propagation	LSZH	Low smoke emission: Light transmittance > 60%

Low corrosive gases emission	Impact resistance: AG2. Medium impact	Outdoor installation: permanent

Environmentally friendly	Water resistance: AD3 Aspersion	Chemical & oil resistance: acceptable