The armoured halogen free cable

Conductor: Electrolytic copper, class 5 (flexible), based on EN 60228

Insulation: XLPE.
The standard identification is the following:
1 x natural
2x Blue + Brown
3 G Blue + Brown + Yellow/green
3 x Brown+ Black+ Grey
4 G Brown + Black + Grey + Yellow/green
4 x Brown + Black + Grey + Blue
5 G Brown + Black + Grey + Yellow/green + Blue

Armour bedding: LSZH polyolephine inner sheath.

Armour: Galvanised steel or aluminium tape armour. Aluminium armour is generally used in single core cables to avoid parasite currents that may overheat the cables.

Outer sheath: LSZH polyolephine outer sheath. Green colour, non-toxic and fire retardant.

Applications: The armoured and halogen free cable Toxfree ZH RZ1FZ1-K (AS) is a high security cable. In case of fire, it does not emit toxic or corrosive gases, thereby protecting public health and avoiding any possible damage to electronic equipment. For this reason, its use is recommended for public places, in installations with presence of rodents, and installations in general where the cable is subject to risk of mechanical aggresion.

National norm / european: EN 60332-1 / EN 50266 / EN 50267-1 / EN 50267-2 / EN 61034

International norm: IEC 60332-1 / IEC 60332-3 / IEC 60754-1 / IEC 60754-2 / IEC 61034

CHARACTERISTICS

	Flexible conductor, class 5		Minimum service temperature: -15ºC		Maximum service temperature: 90ºC
	Maximum short-circuit temperature: 250ºC (max 5 s)		Minimum bending radius: 10 x cable diameter		Meter by meter marking
	Fire non-propagation		LSZH		Low smoke emission: Light transmittance > 60%
	Low corrosive gases emission		Impact resistance: AG3. Strong impact		Outdoor installation: permanent
	Environmentally friendly		Water resistance: AD3 Aspersion		Chemical & oil resistance: acceptable

INSTALLATION CONDITIONS

	Public places		Industrial use
	Open air		Buried
	In conduit		Rodent proof