LOW VOLTAGE 100/100V

HD 22.6 / UNE 21027-6 Reference Norm

The special cable for welding.

Conductor: Electrolytic copper, class D (flexible), based on UNE 21027-6

Separator: Polyester tape.

Outer sheath: Thermosetting rubber (type EM5). Black colour.

Applications: The Topweld H01N2-D cable has been specially designed for transmitting high currents between the welding generator and the electrode. The high degree of flexibility makes using the welding tool easier and also keep knots from forming in the cable that could cause the internal conductor to break. It can also be used in automatic welding machines, transport belts, and production or assembly lines, for example in automobile assembly lines.

National norm / european: EN 60332-1

International norm: IEC 60332-1

CHARACTERISTICS

	Extra flexible conductor, class D		Minimum service temperature: -25ºC		Maximum service temperature: 85ºC
	Maximum short-circuit temperature: 250ºC (max 5 s)		Minimum bending radius: 5 x cable diameter		Meter by meter marking
	Impact resistance: AG2. Medium impact		Outdoor installation: permanent		Water resistance: AD3 Aspersion
	Chemical & oil resistance: good

INSTALLATION CONDITIONS

	Industrial use		Welding