Cables for photovoltaic solar installations

Conductor: Class 5 tinned copper, based on EN 60228

Insulation: LSZH Rubber EI6 type

Outer sheath: LSZH thermosetting rubber (type EM8). Red or black colour.

Applications: Flexible cables for mobile service and for fixed installations. Suitable for interconnection of photovoltaic panels and from panels to inverter of dc to ac. High security cables (AS) : no fire propagation, low smoke fumes and halogen free. These cables are suitable for indoor and outdoor installations.

National norm / european: EN 60332-1 / UNE-EN 60332-3 / EN 50267-1 / EN 50267-2 / EN 61034

International norm: IEC 60332-1 / IEC 60332-3 / IEC 60754-1 / IEC 60754-2 / IEC 61034

CHARACTERISTICS

Flexible conductor, class 5/6	Minimum service temperature: -40ºC	Maximum service temperature: 120ºC

Maximum short-circuit temperature: 250ºC (max 5 s)	Minimum bending radius: 3 x cable diameter	Meter by meter marking

Fire non-propagation	LSZH	Low smoke emission: Light transmittance > 60%

Low corrosive gases emission	Impact resistance: AG2. Medium impact	Outdoor installation: permanent

Environmentally friendly	Water resistance: AD7 immersion	Chemical & oil resistance: excellent

Low extreme temperature resistance: excellent	Estimated lifetime 30 years.	UV Resistant