Aluminium LSZH cable for power transmission

Conductor: Aluminium, class 2 based on EN 60228

Insulation: Cross-linked polyethilene

Outer sheath: LSZH polyolefin, green colour

Applications: Aluminium LSOH cable for fixed installations. Suitable for transport and distribution of electric power. These cables are especially recommended for installation in public places and in places where the level of safety is to be raised. High Safety (AS) cable, Non-Flame and non-Fire-Propagator.

National norm / european: UNE-EN 60332-1 / UNE-EN 50266 / UNE-EN 50267-1 / UNE-EN 50267-2 / UNE-EN 61034

International norm: IEC 60332-1 / IEC 60332-3 / IEC 60754-1 / IEC 60754-2 / IEC 61034

CHARACTERISTICS

	Rigid conductor, class 2		Minimum service temperature: -15ºC		Maximum service temperature: 90ºC
	Maximum short-circuit temperature: 250ºC (max 5 s)		Minimum bending radius: 15 x cable diameter		Meter by meter marking
	Fire non-propagation		LSZH		Low smoke emission: Light transmittance > 60%
	Low corrosive gases emission		Impact resistance: AG2. Medium impact		Outdoor installation: permanent
	Environmentally friendly		Water resistance: AD3 Aspersion		Chemical & oil resistance: acceptable

INSTALLATION CONDITIONS

	Public places		Industrial use
	Open air		Buried