Protected power transmission.

Conductor: Electrolytic copper, class 5, based on EN 60228

Insulation: XLPE for RVFV-K or PVC for VVFV-K.
The standard identification is the following:
1 x natural
2 x Blue + Brown
3 G Blue + Brown + Yellow/green
3 x Brown + Black + Grey
3 x + 1 x Brown + Black + Grey+ Blue (reduced cross section)
4 G Brown + Black + Grey + Yellow/green
4 x Brown + Black + Grey + Blue
5 G Brown + Black + Grey + Yellow/green + Blue

Armour bedding: PVC.

Armour: Double steel or aluminium tape armour. Aluminium armour is used in single-core cables to avoid parasite currents that may overheat the cable.

Outer sheath: Flexible PVC outer sheath, black colour.

Applications: Due to its design, this cable is especially suitable for fixed installations that may be subject to mechanical aggression. It is highly recommended for use in installations in warehouses, production plants and agricultural facilities where the presence of rodents could imply a threat to cable integrity. At the same time, its use is recommended for street lighting installations.

National norm / european: EN 60332-1

International norm: IEC 60332-1

CHARACTERISTICS

Flexible conductor, class 5	Minimum service temperature: -15ºC	Maximum service temperature: 90ºC/70ºC

Maximum short-circuit temperature: 250ºC (max 5 s)	Minimum bending radius: 10 x cable diameter	Meter by meter marking

Flame non-propagation	Impact resistance: AG4. High impact	Outdoor installation: permanent

Water resistance: AD7 immersion	Chemical & oil resistance: good