TOXFREE ZH ROZ1-K (AS) VFD EMC 1,8/3 kV

3kV flexible EMC LSZH screened cable for Variable Frequency Drive cables (VFD cables).


TOXFREE ZH ROZ1-K AS VFD EMC 1,8/3kV cable has been specially designed for Variable Frequency Drive Motors and installations where it is necessary to limit the effects of electromagnetic interference (EMI).


  • LOW VOLTAGE 0.6/1 (1,2) KV

  • Flame non-propagation based on UNE-EN 60332-1 and IEC 603...

  • Maximum service temperature: 90ºC.

  • UNE-EN 60332-1 / UNE-EN 60332-3-22 / UNE-EN 50267-1 / UNE...

  • Industrial use / Variable Frequency Drive (VFD)

Cable Specifications


CHEMICAL PERFORMANCE

  • Chemical & Oil resistance: Good.

ELECTRICAL PERFORMANCE

  • LOW VOLTAGE 0.6/1 (1,2) KV

FIRE PERFORMANCE

  • Fire non-propagation based on UNE-EN 60332-3 and IEC 60332-3.

  • Flame non-propagation based on UNE-EN 60332-1 and IEC 60332-1.

  • Low corrosive gases emission based on UNE-EN 60754-2 and IEC 60754-2.

  • Low smoke emission based on UNE-EN 61034 and IEC 61034.: Light transmittance > 60%

  • LSZH (Low Smoke Zero Halogen) based on UNE-EN 60754-1 and IEC 60754-1.

MECHANICAL PERFORMANCE

  • Impact resistance: AG2 Medium severity.

  • Minimum bending radius: x10 cable diameter.

THERMAL PERFORMANCE

  • Maximum service temperature: 90ºC.

  • Maximum short-circuit
    temperature: 250ºC (max. 5 s).

  • Minimum service temperature: -40ºC (fixed and protected installations)

WATER PERFORMANCE

  • Water resistance: AD5 Jets.

Other properties


APPROVALS

  • ABS (in progres)
  • CE

  • DNV-GL

  • RoHS

APPLICATIONS

  • Industrial use.

  • Variable Frequency Drive (VFD)

BASED ON

  • IEC 60502-1 / IEC 60092-353

INSTALLATION CONDITIONS

  • Buried.

  • In conduit.

  • Open Air.

OTHERS

  • Electric fields resistant.

  • Meter by meter marking.

International norm

  • IEC 60332-1 / IEC 60332-3 / IEC 60754-1 / IEC 60754-2 / IEC 61034

National norm / European:

  • UNE-EN 60332-1 / UNE-EN 60332-3-22 / UNE-EN 50267-1 / UNE-EN 61034

Technology


  • 1. Conductor
    • Electrolytic copper, class 5 (flexible), based on EN 60228 and IEC 60228.
  • 2. Grounding Conductor
    • The grounding conductor is divided into three conductors; the equivalent cross section is approximately 50% of the section of the phase conductor.
  • 3. Insulation
    • Cross-linked polyethylene (XLPE)
    • The standard identification of insulated conductors is the following:
    • 4G grey + brown + black + yellow/green (up to 4 mm2)
    • 3x + 3G grey + brown + black + yellow/green (3 x) (from 6 mm2 onwards)
  • 4. Screen
    • Aluminium-polyester tape screen, helically placed over the insulated conductors. Over the tape there is a tinned copper braid screen. The tape and the braid act as a double screen to cut out all of the the electromagnetic interference.The screen has a cover of 100% and its total section is approximately 10% of one of the conductors.
  • 5. Outer sheath
    • Polyolefin LSZH outer sheath, black colour.

Other cables with similar properties


TECHNICAL & SALES SUPPORT

If you have any questions, please contact us. We’ll do our best to help.



Your message has been sent. Thank you

To download the cable datasheet, please complete the form below


Your message has been sent. Thank you