Flexible 1.000 V rubber cable for industrial use.
XTREM® DN-F is a flexible rubber cable for mobile heavy duty. Suitable for installations in dry, damp or wet locations, outdoors, machines in industrial workshops, motors and transportable machines; on construction sites and for agricultural exploitations. Suitable for submerged installations (AD8) and for supplying power to low voltage appliances including electric motors and submersible pumps in deep water installations as well many other types of electrical equipment.
Chemical & Oil resistance: Excellent.
Grease & mineral oils resistance: Excelente
Water resistance: AD8 Submersion.
LOW VOLTAGE 0,6/1kV
Flame non-propagation based on UNE-EN 60332-1 and IEC 60332-1.
Impact resistance: AG2 Medium severity.
Minimum bending radius: 3 x cable Ø (up to 12 mm2).
4 x cable Ø (from 12 mm2 onwards).
Maximum service temperature: 90ºC.
temperature: 250ºC (max. 5 s).
Minimum service temperature: -40ºC (fixed and protected installations)
Meter by meter marking.
National norm / European:
- 1. Conductor
- Electrolytic copper, class 5 (flexible), based on EN 60228 and IEC 60228.
- 2. Insulation
- Rubber (type EPR).
- The standard identification of insulated conductors is the following:
- 1 x natural
- 2 x Brown + Blue
- 3 G Brown + Blue + Yellow/green
- 4 G Brown + Black + Grey + Yellow/green
- 5 G Brown + Black + Grey + Blue + Yellow/green
- 3. Outer sheath
- Flexible rubber. Black colour.
Other cables with similar properties
TECHNICAL & SALES SUPPORT
If you have any questions, please contact us. We’ll do our best to help.