Conductor:
Annealed electrolytic copper conductor, class 2.
Optionally, with longitudinal sealing (cable type -2OL).

Internal semiconductor:
Screen above the conductor, made of thermosetting semiconductor material.

Insulation:
Ethylene polypropylene rubber (EPR), cross-linked in dry nitrogen atmosphere.

External semiconductor:
Screen above the insulation, made of thermosetting and strippable semiconductor material.

Copper screen:
Screen of Cu wires and Cu tape, with a minimum cross-section of 16 mm2

Separator:
Polyester tape completely covering the screen to facilitate the stripping of the outer sheath. Optionally, substituted by hygroscopic strap (cables with longitudinal sealing, type -OL and -2OL).

External sheath:
External sheath of halogen-free polyolefin, red colour. Optionally with grey (S) or green (AS) bands.

Applications:

Cable for fixed installations. Suitable for the transmission and distribution of electricity in a medium voltage network, halogen-free. Can be used indoors, outdoors and in underground applications.
Optionally, types (S) and (AS) can be manufactured:
- Halogen-free cable with low smoke emission and no flame propagation. Safety cable (S).
- Halogen-free cable with low smoke emission and no flame propagation. Safety cable (AS)

CHARACTERISTICS

Design standards:
IEC 60502-2

Nominal voltages:
6/10 kV, 8,7/15 kV, 12/20 kV and 18/30 kV

Maximum temperature of the conductor:
90ºC

Maximum temperature in short circuit:
250ºC (maximum 5 s)

Bending radius:
15 x Ø ext.

Halogen-free:
as per UNE-EN 50267