Conductor:
Annealed electrolytic copper conductor, class 2. Optionally, with longitudinal sealing (cable type -2OL)

Internal semiconductor:
Screen above the conductor, made of thermosetting semiconductor material.

Insulation:
Cross-linked polyethylene (XLPE), cross-linked in dry nitrogen atmosphere.

External semiconductor:
Screen above the insulation, made of themosetting and strippable semiconductor material.

Copper screen:
Screen of Cu wires and cross-wound of Cu tape, with a minimum cross-section of 16 mm2

Longitudinal sealing:
Hygroscopic tape completely covering the screen (cable type –OL and -2OL).

Filling or separator:
Possible, depending on the configurations.

External sheath:
External sheath of fire-retardant and halogen-free polyolefin, red colour with two green bands. (for AS type).

Applications:
Cable for fixed installations. Suitable for the transmission and distribution of electricity in a medium voltage network. Can be used indoors, outdoors and in underground applications.
Halogen-free cable with low smoke emission and no flame propagation properties, safety cable (AS).

CHARACTERISTICS

Design standards:
IEC 60502-2

Nominal voltages:
6/10 kV, 8.7/15 kV, 12/20 kV and 18/30 kV

Maximum temperature of the conductor:
90ºC

Maximum temperature in short circuit:
250ºC (maximum 5 s)

Bending radius:
15 x Ø ext.

Halogen-free:
as per UNE-EN 50267

Low emission of smoke:
as per UNE-EN 61034

Non-propagator of fire:
as per UNE-EN 50266, category B