TOXFREE ZH RZ1MZ1-K (AS)

Halogen free (LSZH) armoured cable with galvanized steel wire armour.


TOXFREE ZH RZ1MZ1-K (AS) is a LSZH is a safety cable. In case of fire, it does not emit toxic or corrosive gases, thereby protecting public health and avoiding any possible damage to electronic equipment. For this reason, its use is highly recommended for public places, in hazardous areas with explosive gas atmospheres (ATEX), and installations in general where the cable is subject to risk of mechanical aggresion.

TOXFREE ZH RZ1MZ1-K (AS) cable performance

Electrical performance

LOW VOLTAGE 0,6/1kV

Standard

IEC 60502-1

Approvals

CE / RoHS

CPR Construction Products Regulations Cca s1b, d1, a1

Thermal performance

Maximum conductor temperature: 90ºC.

Maximum short-circuit temperature: 250ºC (max. 5 s).

Minimum service temperature: -50 °C according to GOST 31996.

Minimum installation and handling temperature: 0 °C

Fire performance

Flame non-propagation based on EN 60332-1 and IEC 60332-1.

Fire non-propagation based on EN 60332-3 / IEC 60332-3 and EN 50399.

LSHF (Low Smoke Halogen Free) based on  EN 60754-1 and IEC 60754-1.

Low smoke emission based on EN 61034 and IEC 61034: Light transmittance > 60%

Low corrosive gases emission based on EN 60754-2 and IEC 60754-2.

Reaction to fire CPR:  Cca s1a, d1, a1, according to EN 50575.

Mechanical performance

Minimum bending radius: x10 cable diameter.

Impact resistance: AG4 High severity.

Rodent proof

Chemical performance

Chemical & Oil resistance: Acceptable.

Hydrocarbon resistant.

UV Resistant: EN 50168.

Potentially explosion hazard locations. (ATEX)

Water performance

Water resistance: AD5 Jets.

Other

Meter by meter marking.

Installation conditions

Open Air.

Buried.

In conduit.

Applications

Industrial use.

Potentially explosion hazard locations. (ATEX)

TOXFREE ZH RZ1MZ1-K (AS) cable design

Conductor

Electrolytic annealed copper, class 5 (flexible), based on EN 60228 and IEC 60228.

Insulation

Cross-linked polyethylene (XLPE) type DIX-3 according to HD 603 and type XLPE according to IEC 60502-1.

The standard identification of insulated conductors according to HD 308 is the following:

1 x   natural

2 x  Blue + Brown

3 G  Blue + Brown + Green/yellow

3 x  Brown+ Black+ Grey

4 G  Brown + Black + Grey + Green/yellow

4 x  Brown + Black + Grey + Blue

5 G Brown + Black + Grey + Blue + Green/yellow

6 or more Black numbered + Green/Yellow

Armour bedding

Low smoke halogen free (LSHF) polyolefin inner sheath.

Armour

Galvanized steel wire armour.  Aluminium armour is used in single-core cables to avoid parasite currents that may overheat the cable.

Outer sheath

Low Smoke halogen free (LSHF) polyolefin, type ST8 according to IEC 60502-1. Black color, non-toxic and fire retardant.


  • LOW VOLTAGE 0,6/1kV

  • Maximum service temperature: 90ºC.

  • EN 60332-1 / EN 60332-3

  • Industral use / Potentially explosion hazard locations. (ATEX)

  • Cca-s1b, d1, a1

Cable Specifications


ENVIRONMENTAL PERFORMANCE

  • Chemical & Oil resistance: Acceptable.

CHEMICAL PERFORMANCE

  • Potentially explosion hazard locations. (ATEX)

  • UV Resistant: based on UNE 211605.

ELECTRICAL PERFORMANCE

  • LOW VOLTAGE 0,6/1kV

FIRE PERFORMANCE

  • Fire non-propagation based on EN 60332-3 / IEC 60332-3 / EN 50399.

  • Flame non-propagation based on EN 60332-1 and IEC 60332-1

  • Low corrosive gases emission according to IEC 60754-2
  • Low smoke emission according to EN 61034 and IEC 61034.: Light transmittance > 60%
  • Low smoke halogen free according to IEC 60754-1
  • Reaction to fire CPR: Cca-s1b, d1, a1 according to EN 50575.

MECHANICAL PERFORMANCE

  • Impact resistance: AG4 High severity.

  • Minimum bending radius: x10 cable diameter.

  • Rodent proof

THERMAL PERFORMANCE

  • Maximum service temperature: 90ºC.

  • Maximum short-circuit
    temperature: 250ºC (max. 5 s).

  • Minimum service temperature: -50 °C according to GOST 31996.
  • Minimum service temperature: 0ºC.

WATER PERFORMANCE

  • Water resistance: AD5 Jets.

Other properties


APPLICATIONS

  • Industrial use.

  • Potentially explosion hazard locations. (ATEX)

APPROVALS

  • CE

  • RoHS

BASED ON

  • IEC 60502-1

INSTALLATION CONDITIONS

  • Buried.

  • In conduit.

  • Open Air.

CONSTRUCTION PRODUCT REGULATION

  • Cca-s1b, d1, a1

National norm / European:

  • EN 60332-1 / EN 60332-3

International norm

  • IEC 60332-1 / IEC 60332-3 / IEC 60754-1 / IEC 60754-2 / IEC 61034

OTHERS

  • Meter by meter marking.

Technology


  • 1. Conductor
    • Electrolytic copper, class 5 (flexible), based on EN 60228 and IEC 60228.
  • 2. Insulation
    • Cross-linked polyethylene (XLPE).
    • The standard identification of insulated conductors is the following:
    • 1 x natural
    • 2 x Blue + Brown
    • 3 G Blue + Brown + Yellow/green
    • 3 x Brown+ Black+ Grey
    • 4 G Brown + Black + Grey + Yellow/green
    • 4 x Brown + Black + Grey + Blue
    • 5 G Brown + Black + Grey + Blue + Yellow/green
    • 6 or more Black numbered + Green/Yellow
  • 3. Armour bedding
    • Low smoke halogen free (LSHF) polyolefin inner sheath.
  • 4. Armour
    • Galvanized steel wire armour. Aluminium armour is used in single-core cables to avoid parasite currents that may overheat the cable.
  • 5. Outer sheath
    • Low Smoke halogen free (LSHF) polyolefin, type ST8 according to IEC 60502-1. Black color, non-toxic and fire retardant.

Other cables with similar properties


TECHNICAL & SALES SUPPORT

If you have any questions, please contact us. We’ll do our best to help.



    Your message has been sent. Thank you

    To consult the technical data sheet of the cable, please provide us with your details.


      Your message has been sent. Thank you