TOPFLEX V-K H05V-K and H07V-K cable has been specially designed for installations that require a flexible cable due to the complex nature of their layout. This cable is specially suitable for domestic wiring. It may also be used for equipment wiring, distributors, cabinets and lighting. It is also recommended for installation under false ceilings. Cables with cross section up to 1 mm2 are especially suited for signalling and monitoring installations.
TOPFLEX V-K H05V-K and H07V-K cable performance
LOW VOLTAGE 300/500 V
RATED VOLTAGE H05V-K (up to 1 mm2): 300/500 V · H07V-K (from 1,5 mm2 onwards): 450/750 V.
EN 50525-2-31 / IEC 60227-3
HAR / AENOR / CE/ RoHS / SEC
CPR Construction Product Regulation
Maximum conductor temperature: 70ºC.
Maximum short-circuit temperature: 160ºC (max. 5 s).
Minimum service temperature: 5ºC.
Minimum service temperature: -40oC (fixed and protected installations).
Flame non-propagation based on EN 60332-1 and IEC 60332-1.
Reduced halogen emission. Chlorine <15%.
Reaction to fire CPR: Eca
, according to EN 50575.
Minimum bending radius: 5 x cable diameter.
Chemical & Oil resistance: Acceptable.
Meter by meter marking.
Temporary site installations.
Available in rolls (lengths of 50 and 100 m) and drums.
TOPFLEX V-K H05V-K and H07V-K cable design
Electrolytic copper, class 5 (flexible), based on EN 60228 and IEC 60228.
Extra sliding flexible polyvinyl chloride type TI1 according to EN 50363-3.
The standard identification of insulated conductors is the following:
Blue RAL 5012
Brown RAL 8003
Black RAL 9005
Red RAL 3000
Green/Yellow RAL 6018/1021
Grey RAL 7000
Dark Blue RAL 5010
White RAL 9010
Orange RAL 2003
Violet RAL 4005
Pink RAL 3015
Other colors available on request.