XTREM DN-F cables is a flexible and rubber cable for mobile heavy duty. Suitable for installations in dry, damp or wet locations, outdoors, for hazardous areas with explosive gas atmospheres, machines in industrial workshops, motors and transportable machines; on construction sites and for agricultural exploitations.
XTREM DN-F cable performance
LOW VOLTAGE 1,8/3kV
CE / RoHS
Construction Products Regulation (CPR)
Maximum service temperature: 90ºC.
Maximum short-circuit temperature: 250ºC (max. 5 s).
Minimum service temperature: -40ºC (fixed and protected installations) and -25ºC (mobile use)
Flame non-propagation based on UNE-EN 60332-1 and IEC 60332-1.
Reaction to fire CPR: Eca , according to EN 50575.
Minimum bending radius: 3 x cable diameter < 12 mm.
4 x cable diameter ≥ 12 mm.
Impact resistance: AG2 Medium severity.
Chemical & Oil resistance: Excellent.
Grease & mineral oils resistance: Excellent.
Water resistance: AD8 Submersion.
In drinkable water according to AS/NZS 4020.
Meter by meter marking.
Submersibles pumps cable.
Temporary site installations.
Available in rolls of 100 m and drums.
XTREM DN-F cable design
Electrolytic copper, class 5 (flexible), based on EN 60228 and IEC 60228.
Rubber (type EPR)
The standard identification according to HD 308 is the following:
1 x Natural
2 x Blue + Brown
3 G Blue + Brown + Yellow/green
3x Brown + Black + Grey
4 G Brown + Black + Grey + Yellow/green
4x Brown + Black + Grey + Blue
5 G Brown + Negro + Grey + Blue + Yellow/green
6 or more Black numbered + Green/Yelow
Flexible rubber type SE1 according to IEC 60502-1. Black color.