XTREM DN-F cables are designed to supply power to low voltage appliances like submersible pumps in deep water installations, mining installations as well as many other types of electrical equipment. The nominal voltage up to 1000 V thanks to the high dielectric properties of the insulation material (according to HD 516).
XTREM DN-F cable performance
LOW VOLTAGE 0,6/1kV
CE / RoHS
Construction Products Regulation (CPR)
Maximum service temperature: 90ºC.
Maximum short-circuit temperature: 250ºC (max. 5 s).
Minimum service temperature: -40ºC (fixed and protected installations) and -35ºC (mobile use)
Flame non-propagation based on UNE-EN 60332-1 and IEC 60332-1.
Reaction to fire CPR: Eca , according to EN 50575.
Minimum bending radius: 3 x cable diameter < 12 mm.
4 x cable diameter > 12 mm.
Impact resistance: AG2 Medium severity.
Chemical & Oil resistance: Excellent.
Grease & mineral oils resistance: Excellent.
Water resistance: AD8 Submersion.
Meter by meter marking.
Temporary site installations.
Available in rolls of 100 m and drums.
XTREM DN-F cable design
Electrolytic copper, class 5 (flexible), based on EN 60228 and IEC 60228.
Rubber (type EPR)
The standard identification of insulated conductors is the following:
1 x Natural
2 x Blue + Brown
3 G Blue + Brown + Yellow/green
4 G Brown + Negro + Grey + Yellow/green
5 G Brown + Negro + Grey + Blue + Yellow/green
Flexible rubber. Black colour.